for further information contact your local stmicroelectronics sales office. march 2014 docid025666 rev 2 1/4 STEVAL-ISB018V1 evaluation board for stcc5021 usb charging controller with attach detection data brief features ? usb 2.0 sdp or cdp data pass-through with s3 remote wakeup support or automatic charging ? permanent usb 3.0 superspeed data pass- through between input and output usb connector ? cdp mode with charging indication after cdp negotiation ? dcp modes with charging indication (bc1.2 mode, divider mode, auto-detect mode) ? attach and charging/end-of-charging detection and indication ? resistor-programmable precise current limiter and short-circuit protection ? rohs compliant description this STEVAL-ISB018V1 system evaluation board allows the easy measurement of stcc5021 parameters and the evaluation of all its functions and operating modes. www.st.com
schematic diagram STEVAL-ISB018V1 2/4 docid025666 rev 2 1 schematic diagram figure 1. steval- isb018v1 circuit schematic 2 02
docid025666 rev 2 3/4 STEVAL-ISB018V1 revision history 4 2 revision history table 1. document revision history date revision changes 09-dec-2013 1 initial release. 04-mar-2014 2 short description has been updated.
STEVAL-ISB018V1 4/4 docid025666 rev 2 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com
|
